E21 Brakes

Korman Competition Front Brake Kit-All E21

Designed for competition, this kit contains rotors that are 1 1/2" larger in diameter than the 323i (225mm) brakes. Vented rotors feature 2 piece aluminum hat/iron rotor construction. Calipers are fixed 4 piston aluminum units weighing only 4.9 lb. each, and include stainless steel caliper pistons. Pads included, 15' wheel required.

P/N 34112323

Korman Rear Competition Big Brake Kit

As above, requires deleting the emergency brake assembly and using 323i trailing arms. An adjustable proportioning valve is strongly recommended.

P/N 34210323

320i Stage 1 Brake Kit

Kit includes 2 vented rotors, (255mm x 22 mm vs. 255mm x 12.7mm stock), our special caliper spacer kit and brake pad hardware. Fits 78-79 320i only. (later models can utilize this kit with the addition of larger struts and bearing hubs)

P/N 34113320

Korman High Performance Brake Rotors

Available in either a computer controlled cross-drilled version with the holes chamfered to the wear limit, or in a computer controlled gas slotted version with the gas ports milled to the wear limit. Our rotors are then finish plated with cadmium. While nothing beats the appearance of crossdrilled rotors, we suggest using the gas slotted versions for true high performance and track use due to superior wear rates and brake cooling. Our high performance rotors are especially beneficial in non-ventilated rotor applications.

320i, 320/6>8/77, 323i>82 Front P/N 3411D119112

320i 8/77> Front P/N 3411D119248

Other applications available on a special order basis

Stainless Steel/Teflon Brake Lines

Essential for driving schools and highly recommended for all high performance driving. Provides stronger pedal, improved modulation under hard brake usage. Eliminates expansion associated with rubber lines. Kit includes a full set of 6 lines. As used in ALL our race cars, perfectly suitable for the street.

320, 320/6 P/N 34321004

323i P/N 34321323 Includes rear lines with banjo fitting!

Super Blue Racing Brake Fluid

A non-silicone high performance dot 4 brake fluid designed for the extreme demands of motor racing, yet perfectly suited for street applications.

 Sold in 1 Liter Cans, P/N SUPER BLUE

Korman Endurance High Performance Brake Pads

Custom friction material that won the 24 Hours of Watkins Glen, Driver and Manufacturer's Championships in IMSA, etc. Excellent for dual purpose street/track use since this compound works well under both light street and full race conditions. Your old backing plates may be required in exchange on low volume part numbers.

• 320i, 320/6, 323 >77 Front P/N KDB 116
• 320i, 320/6, 323 77> Front P/N KDB 192
• 323i Rear-made to order

Korman High Performance Rear Brake Shoes-320, 320/6

Thinking of converting your rear drums to discs? Try these shoes first! Semi-metallic friction material yields performance rivaling disc brakes at a fraction of the cost. Excellent upgrade for street driven cars, mandatory for track use. We need your old shoes back as cores.

P/N 34213250

Core P/N 3421CORE

High Performance Brake Pads

An excellent upgrade over stock pads or MetalMasters. We use these pads in our shop as a standard replacement part since they offer no drawbacks in the areas of dust, noise, cold performance, etc. They do, however, offer excellent resistance to fade in high performance situations. Stock pads have a max temp of 572°, MetalMasters have a max temp of 872°, but Ferodos have a max temp of 1300°!

• 320i 77-78 Front P/N FDB162
• 320i 79-83 Front, 323 77-81 Front P/N FDB192
• 323 Rear 77> P/N FDB210

© Korman Autoworks, 1997